18.Laboratory Centrifugal Spray Granulation Dryer
Product Description
Introduction:
The spray volume is 1-5 L/h. Utilizing the frequency control
centrifugal atomizer, the spray dryer can dry materials such as
solutions, emulsion, suspension, and paste etc. into powder. Fixed
or movable structure is alternative, and it is flexible and
convenient with high speed and high efficiency. It is suitable to
heat-sensitive materials.
Working principle:
After being sent into the centrifugal atomizer by a feed pump, the
freed liquid is then atomized into droplets.
Heat-exchange carries out between the droplets and hot air, and
material is dried into powder in a very short time. powder is
collected by a barrel at the bottom of the tower or cyclone
separator.
It is an ideal device to dry feed liquid into powder for one-time
continuous production.
Features:
1. Short drying time, suitable especially for thermal sensitive
material and high viscosity material like medical concentrate.
2. Easy operation, convenient adjusting, easy to disassemble and
clean.
3. Various particle size available by adjusting the spray rpm,
spray disc, liquid concentrate and air etc.
4. Can get various final moisture by adjusting the spray volume and
outlet air temp.
5. Multiple dust collector used to ensure no material loss.
LX-5KG Laboratory centrifugal spray granulation dryer is designed
for colleges and universities, research institutes and enterprises
of product research and development and small batch production, its
characteristic is running low noise, fast drying speed, low
temperature liquid is heated, operation simple, the spray drying
equipment is a kind of continuous atmospheric dryer.
Using special lab centrifugal spray granulation drying equipment to
spray liquid into spherical droplets, make its contact with the hot
air drying. Used for drying of some heat-sensitive liquid,
suspending liquid and viscous liquid, is the most solid extraction
device best.
Technical Parameter
| Model | LX-5 |
| Max. Water Evaporation Capacity (kg/h) | 5kg/h |
| Material | SUS304, SUS316L |
| Inlet Temperature (℃) | 230-350℃ |
| Out Temperature (℃) | 90-150℃ |
| Spray Type | High Speed Centrifugal Atomizer |
| Applications | Electronic material, ceramics, magnetic materials, new energy
materials, new metal materials, chemicals, etc. |
| Atomization Rotated Speed (RPM) | 0-18000 |
| Spray Disc Diameter (mm) | 55-65 |
| Heating Method | Oil, natural gas, coal gas, liquefied gas, marsh gas, coalmine,
steam, electricity, etc. |
Remarks: Water evaporation capacity depends on material property,
solid content, inlet & outlet temperature.
Main Feature
* Fast drying speed and high efficiency;
* It can handle high concentration and high viscosity liquid;
* Products with less fine powder content and good dispersibility,
fluidity and solubility can be obtained;
* The product has good sphericity and excellent particle size
distribution, and the particle size of the product can be adjusted
arbitrarily;
* The production process is simplified, automatic control,
convenient operation, suitable for continuous production control.
