High Speed Centrifugal Spray Drying Machine For Powder
Product Description
The machine adopts full close structure with primary middle and
high effect air filter to fit one hundred
thousand grade requirement, the tower body is provide cooling air
jacket to make wall temperature less than80 degree, when the
material stops on wall will not to be preheated and softened, it
increases the powdercollection rate (95%) and will not appear
mixing and sticking wall phenomenon.
On the basis of introducing foreign advanced drying technology,
Wuxi Tianyang Drying Equipment Co., Ltd. cooperates closely with
many domestic scientific research institutes to develop and produce
various types of domestic leading high speed centrifugal spray
drying equipment by itself.
The LT series high speed centrifugal spray drying machine for
powder produced by our company has passed the appraisal of new
products in Jiangsu Province, China. It is a drying equipment
specially introduced by the Product Quality Inspection Center. It
is also a special equipment company designated by the Ministry of
Chemical Industry to manufacture high-speed centrifugal spray
dryers.
Working Principle
The working principle of LT series high speed centrifugal spray
drying machine for powder is that after the air enters the heating
device through the filter, it enters the hot air distributor at the
top of the drying chamber, and the hot air passing through the hot
air distributor enters the drying chamber evenly and rotates in a
rotating manner. At the same time, the material liquid is sent to
the high-speed centrifugal atomizer at the top of the drying
chamber, and the material liquid is atomized into extremely small
mist droplets by the centrifugal atomization disc. It can be dried
into powdered granules in a short period of time, that is finished
products.
Main Features
* Drying speed is quickly.
* The final product quality is better.
* The product has good dispersibility, fluidity and solubility.
* The production process is simple and the operation and control
are convenient.
* Air jacket cooling system is used on the drying chamber wall and
roof to prevent the material from being melted and hung on the
wall.
* The inner wall of the drying chamber adopts an air rotary purging
system to reduce the phenomenon of sticking to the wall.
* According to user requirements, the products can meet the
requirements of GMP national standards.
Technical Parameter
| Model | LT Series High Speed Centrifugal Spray Drying Machine |
| Max. Water Evaporation Capacity (kg/h) | 5 | 25 | 50 | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 1000 | 1200 | 2000 | 3000 |
| Inlet Temperature (℃) | 140-350 ℃ |
| Out Temperature (℃) | 80-90 ℃ |
| Spray Type | High Speed Centrifugal Atomizer |
| Atomization Rotated Speed (RPM) | 25000 | 18000-22000 | 15000-22000 | 12700 | 11800 |
| Spray Disc Diameter (mm) | 60 | 120 | 150 | 180 | 210 |
| Heating Sources (Option) | Oil, natural gas, coal gas, liquefied gas, marsh gas, coalmine,
steam, electricity, etc. |
Remarks: Water evaporation capacity depends material property,
solidcontent, warmairinlet & outlet temperature.
