16.Electronic Materials Centrifugal Spray Granulation DryerProduct Description
Product Description
Pressure Spray Dryer is an apparatus that can finish drying and
granulating at the same time. The needed ball granule with certain
size and ratio can be gotten in accordance with requirements of
process to adjust pressure, flow, and size of atomizing hole.
The working of this set is as follows: the liquid of raw material
is pumped in through diaphragm pump. The liquid of raw material
be atomized into tiny droplets. Then it gathers with hot air and
falls off. Most parts of powder material will be collected
through the outlet of discharged at the bottom. The wasted air and
fine powder will be collected through collector at the bottom
of cyclone. At the outlet it can also be equipped with two grades
of duster. Its ratio of recovery can be above 99%.
LX-Series heat sensitive electronic materials centrifugal spray
granulation dryer is mainly higher solids content of the slurry
through the high-speed centrifugal spray granulation, after the
dried productcircular spherical, free-flowing good, it can quickly
fill the film, residual moisture centent and bulk specific gravity
constant good and suitable for and isostatic molding products using
a mold pressing than manual and mechanical granulation with a long
life. Pressed out of the product consistency, smooth finish.
LX-Series electronic centrifugal spray granulation drying equipment
has been widely used in ceramics, ferrite, powder metallurgy and
other industries of the material particles centrifugal granulation
special requirements, the requirements of the particle size can be
adjusted to the optimum value of the distribution curve,
distribution its main technical performance indicators are can
reach the world advanced level, the basic realization of automatic
control, the device is a key component of the design in a leading
position in the same type of equipment.
Main Technical Parameter
| Model | LX-550 |
| Max. Water Evaporation Capacity (kg/h) | 550kg/h |
| Material | SUS304, SUS316L |
| Inlet Temperature (℃) | 230-350℃ |
| Out Temperature (℃) | 90-150℃ |
| Spray Type | High Speed Centrifugal Atomizer |
| Applications | Electronic material, ceramics, magnetic materials, new energy
materials, new metal materials, chemicals, etc. |
| Atomization Rotated Speed (RPM) | 0-18000 |
| Spray Disc Diameter (mm) | 150-180 |
| Heating Method | Oil, natural gas, coal gas, liquefied gas, marsh gas, coalmine,
steam, electricity, etc. |
Remarks: Water evaporation capacity depends on material property,
solid content, inlet & outlet temperature.
Main Features
* Fast speed drying, high efficient.
* Can handle feed liquor in high concentration and high viscosity.
* Can get product in small content, good dispersibility, mobility
and solution.
* Good degree of sphericity, excellent particle distribution, can
adjust the particle diameter.
* Simplify production process, convenient operation control, can
control production continuously.
FAQ
Q1: What equipment do we provide?
• Centrifugal spray granulator dryer.
• Pressure spray granulator dryer.
• Centrifugal spray dryer.
• Melting spray-cold air solidification granulator dryer.
• Spray dryers and granulators using non-aqueous liquid as the
processing vehicle.
• Customized equipment to meet your special needs.
Q2: What our equipment can do?
• Can dry thermal sensitive materials and retain the powders'
reactivity.
• Can produce spheres of solid, hollow, porous and microporous.
• Can produce spheres of mini and micro sizes.
