13Automatic Energy-saving Centrifugal Spray Granulation Dryer
Product Description
Features:
(1)Fast drying: liquid or wet raw material after atomization,
significantly increased surface area, in the hot air flow,
instantaneous evaporation can be 95% ~98% moisture, to complete the
drying time only a few seconds, and especially suitable for drying
of thermal sensitive material.
(2) Excellent drying effect: Finished products with good
uniformity, fluidity and solubility, the product high purity, good
quality.
(3)Production process is simple, convenient operation and control.
For material which moisture content 40-60% (special material even
moisture contents 90%) of the liquid to a dry powder products,
dried without crushing and screening, and product purity. Product
size, density and moisture can be adjusted( within a certain range)
by changing the operating conditions.
LX-Series fully automatic energy-saving centrifugal spray
granulation dryer (hot air drying) is mainly for the slurry with
high solid content to be sprayed and granulated by a high-speed
centrifugal atomizer. Filling the film, the residual moisture
content and loose specific gravity are stable, and it is suitable
for isostatic pressing and molding products. The service life of
the mold is relatively longer than that of manual and mechanical
granulation. The pressed product has better consistency and higher
finish.
Main Features
* Fast drying speed and high efficiency;
* It can handle high concentration and high viscosity liquid;
* Products with less fine powder content and good dispersibility,
fluidity and solubility can be obtained;
* The product has good sphericity and excellent particle size
distribution, and the particle size of the product can be adjusted
arbitrarily;
* The production process is simplified, automatic control,
convenient operation, suitable for continuous production control.
Scope of Application
LX-series automatic energy-saving centrifugal spray granulation
drying equipment has been used in electronic ceramics, precision
ceramics, ceramics, magnetic materials, new energy materials, new
metal materials, inorganic medicines, biology, food, chemicals,
fine chemicals and other industries.
Technical Parameter
| Model | LX Centrifugal Spray Granulation Drying Machine |
| Max. Water Evaporation Capacity (kg/h) | 5 | 10 | 15 | 20 | 25 | 30 | 50 | 100 | 120 | 150 | 200 | 300 | 400 | 500 | 600 | 800 | 1000 |
| Inlet Temperature (℃) | 230-350℃ |
| Out Temperature (℃) | 90-150℃ |
| Spray Type | High Speed Centrifugal Atomizer |
| Atomization Rotated Speed (RPM) | 0-18000 |
| Spray Disc Diameter (mm) | 55-65 | 70-80 | 80-120 | 120-150 | 150-180 |
| Heating Sources (Option) | Oil, natural gas, coal gas, liquefied gas, marsh gas, coalmine,
steam, electricity, etc. |
Remarks: Water evaporation capacity depends material property,
solid content, inlet & outlet temperature.
