7.Centrifugal Spray Dryer for Milk Powder
Product Description
LPG instant coffee milk powder spray dryer making machine is a kind
of continuous atmospheric dryer.Use pneumatic or electric
atomization device to make liquid high-speed centrifugal spray as
fog droplet, make these fog droplet contact with the hot air in the
drying chamber and instantaneous drying.
Characteristic
1.Stainless steel material, arc corner design and polyester powder
coated shell, prevents corrosion of acidity and alkaline air
effectively.
2. Imported Schneider electrical components which is more
stability.
3. PLC control system, make your research more easier and
efficient.
4. Build in oil-free air compressor, without any noise.
5. Self-priming peristaltic pump, avoid secondary pollution, make
sure whole process conducted steady and smoothly.
6. Narrow size distribution, more than 95% of the dry powders are
in the same range of particles.
7. Innovative tower wall purging device, improves the material
recycling rate.
8. High speed of drying, after spraying of the material liquid, the
surface area of material will be increased greatly, make your
research more efficient.
9. In the hot-air flow, 95%~98% of water can be evaporated at a
moment. You can finish material drying only in several seconds.
10. Especially suitable for drying the heat sensitive materials,
after drying, there's no need for smashing and sorting, so as to
reduce the operation procedures and save your time.
LT-Series high speed centrifugal spray drying machine is suitable
for various fields where the production of a powder is required.
LT-50KG high speed centrifugal spray dryer has successfully
processed in the following areas: milk powder, dairy products, egg
products, beverage, flavours and colourings, plant and vegetable
extracts, pharmaceuticals, perfumes, blood, ceramics and
superconductors biochemicals, dyestuffs, soaps and detergents,
foodstuffs, adehesives, oxides, textiles and many others.
LT-50 milk spray dryer machine adopts PLC automatic control. All
operations are completed automatically according to the process
parameters set by users. It fully meets the requirements for milk
powder processing production in GMP.
Technical Specifications of Spray Dryer for Milk Powder
| Model | LT-50 |
| Max. Water Evaporation Capacity (kg/h) | 50kg/h |
| Material | SUS304, SUS316L, Ti |
| Inlet Temperature (℃) | 140-350℃ |
| Out Temperature (℃) | 80-90℃ |
| Spray Type | High Speed Centrifugal Atomizer |
| Applications | Dairy Products processing, chemicals processing, plastics
processing, food processing, etc. |
| Transmission Form of Centrifugal Spray Head | Compressed air drive |
| Atomization Rotated Speed (RPM) | 21500 |
| Spray Disc Diameter (mm) | 108 |
| Heating Method | Electricity + steam, fuel oil, gas, up to the user. |
| Electric Heating Maximum Power (KW) | 81 |
| Dimensions (L×W×H) m | 3.7×3.2×5.1m |
| Dry Powder Recovery | ≥95% |
Features and Benefits
* Special protection function,the fan will not startand the heater
will not start
* Built-in imported oil-free air compressor with noise less than
50db.
* Equipped with airinlet filter to ensure powder purity.
* Dried product has uniform particle sizemorethan95% of the dry
powder is at the same particle size.
